Rotary Automation

Beam Lubricator

Beam lubricator automatic system

Automatically lubricates the traction beam of the platform, this way getting rid of the labor needed for this task. It also assures the correct and permanent lubrication, extending the life cycle of the driving system components.


The pump is interconnected to the rotation control panel in such way that it only operates when it is rotating. If during a spraying cycle the platform is stopped for any reason, the grease spraying is also suspended, reestablishing itself once the platform starts moving again.


The main components of this system are the high pressure pump and high pressure sprayers.


The automatic beam lubricator is one of the components that joins the wide range of automated systems of Madero Dairy Systems for the complete automation of rotary milking systems.

Benefits:

Allows a more uniform greasing of the rotary beam in time.
Programmable according to the speed of rotation of the platform.
Saves time and labor by just requiring a periodic visual inspection of the system and of the refilling of the pump when required.
The pump can be refilled with a pneumatic or lever pump directly attached to a grease bucket.
It has de function of applying grease out of the programmed Schedule.


Requirements:

Pressurized air regulated to a pressure of 30-50 PSI close to where the lubricating pump will be located
Powered by 110 VCA.


Headquarters

Address:
12236 Cutten Rd.
Houston, TX 77066, U.S.A.
General:
+ 1 (832) 631 - 43 11
E-mail:
sales@maderodairysystems.com
-----------------------------------

Headquarters


Address:
12236 Cutten Rd.
Houston, TX 77066, U.S.A.

General:
+ 1 (832) 631 - 43 11

E-mail:
sales@maderodairysystems.com
-----------------------------------

Follow us:

Follow us: